CHECK OUT OUR RANGE NOW

HUGE SALE | FLASH DEALS | DIY FOR ALL

Our customers say Excellent 4.8 out of 5 based on 809 reviews Read reviews
  • Fast & Reliable Shipping

  • Free help & advice

  • Hassle-free returns

  • Open 7 days a week

HUGE SALES & DEALS

Sikkens Cetol Filter 7 Plus

(21 products)

Sikkens Cetol Filter 7 Plus is a translucent satin woodstain for exterior windows, doors, frames and cladding, in softwood or hardwood. UV absorbers protect the timber from sun damage, while the moisture vapour permeable film lets trapped water escape.

We stock 8 ready mixed shades, from Light Oak to Ebony, in 1L, 2.5L and 5L tins.

View as

Choosing Sikkens Cetol Filter 7 Plus

Sikkens Cetol Filter 7 Plus is the topcoat in a two product Sikkens system. On new or bare joinery it goes over a base coat of Cetol HLS Plus, which gives a more durable and even finish.

In 2024 Sikkens renamed the product Cetol Filter 7. The formula did not change, so tins labelled Filter 7 Plus and Filter 7 hold the same woodstain.

Where To Use It

  • Windows, window frames and shutters
  • External doors and door frames
  • Fascias, cladding and other exterior joinery

It is not made for decking, floors, interior timber or any surface that takes heavy wear. For those jobs, see our full range of wood stains.

Sikkens Cetol Filter 7 Plus Colours And Sizes

Every shade is translucent, so the wood grain stays visible. We stock:

  • Light Oak (006): 1L, 2.5L and 5L
  • Pine (077): 1L and 2.5L
  • Teak (085): 1L, 2.5L and 5L
  • Dark Oak (009): 1L, 2.5L and 5L
  • Walnut (010): 1L, 2.5L and 5L
  • Mahogany (045): 1L, 2.5L and 5L
  • Rosewood (048): 1L, 2.5L and 5L
  • Ebony (020): 1L

How Much Do I Need?

Sikkens gives coverage of about 16 square metres per litre for each coat. A 1L tin covers about 16m², a 2.5L tin about 40m² and a 5L tin about 80m². New timber needs two coats, so double the area when you work out quantities.

How To Apply It

Make sure the timber is clean, dry and below 18% moisture content. On bare wood, apply Sikkens Cetol HLS Plus base stain first, then lightly sand it once dry.

Stir well and apply undiluted with a long haired soft bristle brush, laying off along the grain. It is touch dry in about 3 hours and can be recoated after 16 hours.

Do not apply when rain is likely or below 5°C, and use non ferrous screws and nails. Clean brushes with a brush cleaner straight after use.

Maintenance

Sikkens works on a 5 year maintenance cycle. Check the timber once a year, touch up bare or damaged spots with Cetol HLS Plus, then apply one fresh coat of Filter 7 over the whole surface.

Back to top

Compare /5

Loading...