Ronseal Colron Refined Danish Oil Clear - 500ml

Ronseal Colron Refined Danish Oil is a clear penetrating wood oil with a refined formula that soaks into the grain to feed, protect and enhance bare or previously oiled timber. This 500ml size delivers a hard drying oil finish that brings out the natural colour and grain of the wood without leaving a sticky or tacky surface. Ideal for furniture, worktops, doors and other interior woodwork, it is straightforward to apply with a cloth or brush and easy to maintain.

Key Features

• Refined formula that penetrates deep into the wood grain
• Nourishes and protects bare wood and wood that has been oiled before
• Enhances the natural colour and grain pattern of the timber
• Hard drying finish that does not stay sticky or tacky like raw oils
• Suitable for bare wood or previously oiled surfaces
• Ideal for furniture, worktops, doors and interior joinery
• Easy to apply and simple to maintain with occasional top up coats

How to Use

Prepare the surface: Sand smooth, working through the grades to a fine finish. Remove any old wax, varnish or existing finish, then wipe away all dust with a clean, dry cloth before you start.

Apply the oil: Apply Ronseal Colron Refined Danish Oil liberally using a lint free cloth or brush, working with the grain. Leave it to soak into the wood for around 10 to 15 minutes, then wipe off any excess with a clean cloth to avoid a sticky finish.

Build up coats: Most projects need 2 to 3 coats for a good depth of colour and protection, allowing each coat to dry fully before applying the next.

Drying and curing: The refined formula is typically touch dry within a few hours, though this varies with temperature and ventilation, so always check the tin for exact timings. Allow the final coat to cure fully, usually over several days, before the surface is used hard or exposed to water.

Watch How to Apply Danish Oil

Technical Specifications

Frequently Asked Questions

What is Danish oil?

Danish oil is a penetrating wood finishing oil, typically a blend of oils and varnish, that soaks into the timber rather than sitting on top like a lacquer. It nourishes the wood, brings out the natural grain and colour, and dries to a hard, low sheen finish that does not feel sticky or tacky once fully cured. Ronseal Colron's version uses a refined formula for a clean, clear result.

How do you apply Danish oil?

Sand the wood smooth and remove all dust, then apply the oil liberally with a lint free cloth or brush, working with the grain. Let it soak in for around 10 to 15 minutes, wipe off the excess with a clean cloth, then leave to dry before applying further coats.

Is Danish oil food safe?

Most standard Danish oils, including this refined formula, are not certified as food safe once cured unless the tin specifically states otherwise. If you plan to use it on a chopping board, worktop or anything that will come into direct contact with food, check the product packaging and manufacturer guidance first, or choose a finish that is explicitly certified for food contact.

How many coats of Danish oil do you need?

Most projects need 2 to 3 coats to build up a good depth of colour and protection, with each coat left to dry before the next is applied. Bare or very absorbent timber may need an extra coat.

How long does Danish oil take to dry?

Danish oil is typically touch dry within a few hours, though this depends on temperature, ventilation and how much oil was applied. A full cure, where the finish reaches its hardest and most durable state, generally takes several days, so always check the tin for exact timings.

Does Danish oil darken wood?

Yes, Danish oil typically deepens and warms the natural colour of wood, giving it a richer, more golden or amber tone, especially after the first coat. The exact effect varies by timber type, so it is worth testing on an offcut or hidden area first.