Eveready LED GU10 Spotlight Bulb, 250 Lumen, 4000K Cool White
Care Information
Care Information
Please refer to the product’s description, packaging, or manufacturer’s instructions for detailed handling, and safety guidance. Treat all items with care and use only recommended materials or methods for maintenance.
Delivery and Shipping
Delivery and Shipping
- Small Parcels: From £3.99 for up to 10kg. Each additional 10kg is charged at the same rate. (Carriers: Royal Mail, Yodel)
- Large Parcels (over 120cm): £14.99 per 10kg. (Carriers: Evri, ParcelForce)
- Dispatch Time: Orders are usually dispatched within 1–2 working days.
- Delivery Service: Standard 48-hour service (delivery times may vary by product).
Eveready LED GU10 Spotlight Bulb, 250 Lumen, 4000K Cool White
Description
Description
The Eveready LED GU10 Spotlight Bulb gives 250 lumens of neutral 4000K cool white light from a 3W LED, sized as a 35W halogen equivalent rather than an LED that itself draws 35W. It is a non-dimmable, twist-and-lock GU10 that fits any standard GU10 downlight or spotlight, giving a bright, practical light for kitchens, hallways and utility spaces.
Key features
- 250 lumens of clean, neutral light
- 4000K cool white colour temperature
- 3W LED consumption, equivalent to a 35W halogen GU10 in brightness
- Standard GU10 twist-and-lock base, fits existing GU10 fittings
- Non-dimmable, mains voltage (220-240V), no driver or transformer required
- Instant-on, no warm-up delay
What this bulb is best for
4000K cool white gives a bright, neutral light that works well in kitchens, hallways, landings and utility rooms where good general visibility matters. It is a straightforward replacement for an old 35W halogen GU10 downlight.
How to fit it
- Turn off the power at the light switch (or isolate at the consumer unit if working on the fitting).
- Let any existing bulb cool fully before handling it.
- Twist the old bulb anticlockwise a quarter turn and remove it from the GU10 fitting.
- Line up the pins of this Eveready GU10 bulb and twist clockwise until it locks into place.
- Restore the power and test the light. No transformer or separate driver is needed – GU10 LEDs run directly from UK mains voltage.
Frequently asked questions
Does this bulb actually use 35 watts?
No. The “35W” figure describes the old halogen bulb this LED is designed to replace in brightness terms; the LED itself draws only about 3W, which is why switching to LED cuts running costs so much.
What does 250 lumens look like in practice?
250 lumens is a similar brightness to a 35W halogen GU10, making it a good general-purpose light for a single downlight in a hallway, utility room or kitchen spotlight run.
Is 4000K a warm or cool light?
4000K is classed as cool white, brighter and crisper than a 2700-3000K warm white bulb but not as blue-toned as a 6500K daylight bulb.
Can this bulb be dimmed?
No, this is a non-dimmable LED GU10 and should be used on a standard on/off switch to avoid flickering or early failure on a dimmer circuit.
Technical specification
| Brand | Eveready |
|---|---|
| Bulb type | LED spotlight (GU10) |
| Wattage | 3W (35W halogen equivalent, not an actual 35W draw) |
| Lumens | 250 lm |
| Colour temperature | 4000K (Cool White) |
| Beam angle | Approx. 36° (standard GU10 spot beam) |
| Dimmable | No (non-dimmable) |
| Base type | GU10 (twist and lock) |
| Voltage | 220-240V mains |
| Rated life | 15,000-25,000 hours (typical for this class of GU10 LED) |
| Pack size | Single bulb |
| Product code (SKU) | 101025 |
| Barcode | 5050028174523 |
More GU10 bulbs
Payment & Security
Payment methods
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
