Sandtex Smooth Masonry Paint 10L - PBW

Sandtex Smooth Masonry Paint in Pure Brilliant White (crisp, bright white), supplied in a 10 litre tin. Genuine Sandtex stock with Microseal technology - breathable, waterproof exterior masonry paint protecting brick, render and pebbledash for up to 15 years.

Key Features

• Genuine Sandtex Smooth Masonry Paint with Microseal technology
• Breathable and waterproof - up to 15 years trusted durability
• Touch dry in 3-4 hours, rainproof in around 1 hour in good conditions
• Resists peeling, flaking, dirt, mould and algae
• Smooth, even matt finish in Pure Brilliant White
• Suitable for render, roughcast, pebbledash, concrete, building blocks and facing brick

How to Use

1. Make sure the surface is sound, clean, dry and free of loose or flaking material; treat mould/algae with a fungicidal wash first.
2. On porous, chalky or previously unpainted masonry, apply Sandtex Stabilising Solution and allow to dry fully.
3. Stir the paint thoroughly before use.
4. Apply the first coat by brush, roller or airless spray, working top to bottom.
5. Allow to dry 3-4 hours, then apply a second full coat.
6. Do not apply if rain/frost is forecast or below 8°C during drying.
7. Clean brushes and rollers with water while wet.

Technical Specification

• Coverage: 12-16m² per litre (surface dependent)
• Coats: 2 full coats recommended (1 may suffice as a refresh on sound, painted masonry)
• Drying: touch dry 3-4 hours, recoatable after 3-4 hours, rainproof in around 1 hour
• Suitable surfaces: render, roughcast, pebbledash, concrete, building blocks, facing brick, previously painted masonry
• Not suitable for: common, fletton or engineering brick, wood, or metal
• Application: brush, roller or airless spray
• Guarantee: up to 15 years
• Pack size: 10L
• Colour: Pure Brilliant White

FAQs

Is Sandtex Smooth Masonry Paint waterproof and breathable?
Yes. It's a microporous, breathable coating that lets trapped moisture escape while resisting rain getting in - rainproof within about an hour in good drying conditions.

Can you use masonry paint on wood or metal?
No. It's formulated for masonry - render, roughcast, pebbledash, concrete, building blocks and facing brick - not wood or metal.

How many coats do I need, and how long does it take to dry?
Two full coats on bare/unpainted masonry (one may suffice as a refresh). Touch dry in 3-4 hours, recoatable after 3-4 hours.

Where can I buy Sandtex masonry paint?
Right here - genuine Sandtex stock. Also stocked at Wickes and Screwfix, so it's worth comparing before you buy.

How much wall does a 10L tin cover?
At Sandtex's published 12-16m² per litre, a 10 litre tin covers roughly 120-160m² per coat - plan for half that covered twice with 2 coats.

Technical & Safety Data Sheets

For full technical guidance and safety information, refer to the official Sandtex / Crown Paints documents below:

• Safety Data Sheet (SDS) - Sandtex Microseal Smooth Masonry Paint
• Technical / Application Guide - Sandtex Microseal Smooth Masonry Paint