Rustins White Satin Radiator Paint Enamel - 250ml

Rustins Quick Drying Radiator Enamel in white satin gives a softer, low-sheen finish for radiators, pipes and heating pipework. It is formulated to dry fast, touch dry in around 30 minutes, and is a low odour enamel that also works well as a touch-up paint for white appliances such as fridges. This 250ml tin gives a smooth, durable satin finish that holds its colour through everyday heating cycles.

Key Features

• Fast-drying white satin enamel, touch dry in around 30 minutes
• Heat resistant formula suitable for radiators, pipes and towel rails
• Low odour formulation, more pleasant to use in occupied rooms
• Soft satin sheen, less reflective than gloss, forgiving of minor surface marks
• Doubles as a touch-up paint for white appliances such as fridges
• Brush application straight from the tin, brushes clean up in water
• For water-filled central heating radiators and pipework, not oil-filled electric radiators

How to Use

Turn off the radiator and allow it to cool completely before you start. Wash down the surface to remove grease, dust and any dirt, then lightly key any existing gloss or satin finish with fine abrasive paper and wipe away the dust. Treat any rust spots and allow them to dry, priming any bare metal before you topcoat. Stir well, then brush on a thin, even coat, working along the length of the radiator panels. This enamel is touch dry in around 30 minutes, so a second coat can usually be applied the same day once the first coat has fully hardened. Wash brushes out in water while the paint is still wet. Allow the paint to cure fully before switching the heating back on and running it continuously.

Technical Specifications

Frequently Asked Questions

What is the difference between gloss and satin radiator paint?

Gloss radiator paint gives a shiny, reflective finish, while satin dries to a softer, low-sheen look that is less likely to show minor surface marks. Both are heat resistant and suitable for radiators; the choice mostly comes down to the look you want in the room.

How do you paint a radiator?

Turn the radiator off and let it cool, clean the surface thoroughly, then key any existing gloss or satin finish with fine abrasive paper. Treat any rust, prime bare metal, then brush on a thin, even coat of this Rustins satin enamel. It is touch dry in around 30 minutes, with a second coat usually possible the same day.

How long does radiator paint take to dry?

This Rustins radiator enamel is touch dry in approximately 30 minutes. Full cure still takes longer, so it is best to leave the paint a few days before running the heating continuously.

Can you paint radiators with satinwood?

Standard satinwood paint is designed for walls, doors and skirting rather than the heat a radiator generates, so it is not the best choice. A dedicated radiator satin enamel like this Rustins formula is made specifically to withstand heating and cooling cycles without yellowing or flaking.

Can you paint radiator pipes?

Yes, this enamel can be used on radiator pipes as well as the radiator body. Clean and lightly abrade the pipe first, then apply thin coats with a small brush, taking extra care around joints and fittings.

What is the best paint for radiators?

A dedicated radiator enamel such as this Rustins satin is a better choice than general purpose paint, since it is designed to withstand the heat and expansion of a working radiator while keeping its colour and finish.