Purdy Revolution Roller Frame - 9 Inch x 1.5 Inch Core

The Purdy Revolution Roller Frame is part of Purdy's lightweight, professional roller frame range, built with an open cage design that lets excess paint flow away instead of collecting inside the frame. This makes cleanup faster and helps stop the dried paint buildup that can throw a roller off balance over time.

This 9 inch version is fitted with a 1.5 inch core, the standard core size used by most 9 inch roller sleeves. It is a good match for everyday emulsion and general purpose painting work on walls and ceilings where you want a reliable frame that loads and unloads a sleeve quickly.

How to Use

Slide a 9 inch roller sleeve with a 1.5 inch core onto the frame cage until it sits fully home against the end cap. Give the sleeve a light tap to seat it and check that it spins freely without wobbling before you start rolling. To remove the sleeve once you are finished, tap the end of the roller against the side of the paint tray or a firm edge and slide the cover off the cage.

To attach an extension pole, thread the handle end of the frame onto a Purdy Power Lock Extension Pole or any standard threaded roller pole and turn until it is secure. This lets you paint higher walls and ceilings without a ladder.

Technical Details

• Frame size: 9 inch, fits 9 inch roller sleeves
• Core size: 1.5 inch standard core
• Open cage design for easier cleaning and less paint buildup
• Threaded end, compatible with the Purdy Power Lock Extension Pole and standard threaded poles
• Ergonomic comfort grip handle
• Around 25 percent lighter than previous Purdy roller frames

FAQs

How do I remove a roller sleeve from this frame?
Tap the end of the sleeve firmly against the edge of your paint tray or a solid surface and slide it off the open cage. There is no clip or catch to release.

Is this frame pole compatible?
Yes. It has a threaded end that fits the Purdy Power Lock Extension Pole and other standard acme threaded extension poles.

Will a 1.75 inch core sleeve fit this frame?
No. This frame is sized for a 1.5 inch core. If your sleeves have a 1.75 inch core you will need the 1.75 inch version of this frame instead.