Purdy Four Edge Carbide Scraper Replacement Blade

This is a genuine replacement blade for the Purdy Four Edge Carbide Scraper. It is not a standalone scraping tool, it is the blade only, designed to fit directly into the existing Purdy Four Edge Carbide Scraper handle once the original blade has worn down on all four edges.

Like the blade supplied with the scraper, this replacement has four separate cutting edges ground into a 2.5 inch steel blade, two edges for aggressive scraping through thick or stubborn paint and varnish and two edges ground finer for finishing work. Keeping a spare blade or two on hand means you can carry on working through a job without waiting to source a new one once the fitted blade is fully worn.

How to Use

• Loosen the blade fixing on your Purdy Four Edge Carbide Scraper handle and remove the worn blade.
• Fit the replacement blade into the same slot, lining it up so one of the four edges sits ready for use.
• Tighten the fixing so the blade sits flat and secure in the handle before you start scraping.
• Rotate the blade to a fresh edge as each one dulls, working through all four edges before fitting another replacement.

Technical Details

• Blade width: 2.5 inches (63mm)
• Cutting edges: four usable edges, two aggressive and two finishing
• Compatibility: Purdy Four Edge Carbide Scraper handle
• Pack contents: single replacement blade
• Recommended use: replacing a worn blade once all four edges are dull

FAQs

How do I know when to rotate or replace the blade?
Rotate the blade to a fresh edge as soon as the edge you are using starts to skip or drag instead of scraping cleanly. Once you have worked through all four edges and the whole blade is dull, fit a new replacement blade.

Is this blade compatible with the standard Purdy Four Edge Carbide Scraper?
Yes. This blade is made to fit directly into the existing Purdy Four Edge Carbide Scraper handle, so you do not need to buy a new tool when the original blade wears out.

Is this a complete scraper or just the blade?
This listing is for the replacement blade only. You will need a Purdy Four Edge Carbide Scraper handle to use it, the blade is not sold as a standalone tool.