Purdy Dale XL Elite Cutting-In Paint Brush - 2" / 50mm

The Purdy Dale XL Elite is a precision angular sash brush from Purdy, the American decorating brand that has been handcrafting paint brushes since 1925 and is now part of Sherwin Williams. The Dale sits within Purdy's XL Elite range and is built for controlled, clean edges when cutting in.

This 2 inch (50mm) size is the largest in the Dale XL Elite line, made for covering more ground without losing the precision the range is known for. It handles skirting boards, doors, larger frames and wider trim runs, so you spend less time reloading while still being able to cut a crisp, straight edge.

How to Use

• Dip roughly a third of the bristle length into the paint and tap off the excess rather than scraping it on the rim of the tin.
• Hold the handle firmly but naturally, letting the square edge ferrule guide the tip along the edge you are cutting in.
• Work in long, steady strokes and keep a wet edge so the finish stays even across larger sections.
• Reload before the bristles start to drag, since a well loaded brush gives a smoother, more consistent coat.
• Rinse the brush right after use with water for latex paints or white spirit for oil based paints, reshape the bristles and dry it flat.

Technical Details

• Brand: Purdy, part of Sherwin Williams
• Range: Purdy Dale XL Elite
• Size: 2 inch / 50mm
• Shape: Angular sash and trim brush
• Filament: Dupont, Chinex, Orel and polyester tapered filament blend
• Bristle feel: Stiff, suited to heavy bodied paints
• Ferrule: Square edge stainless steel
• Handle: Lightweight, moisture wicking alderwood rattail handle
• Suitable for: All paint types, primers and stains, interior and exterior use
• Clean up: Fast and easy with water or white spirit depending on the paint used

FAQs

Is the 2 inch Dale XL Elite still precise enough for cutting in?
Yes, the square edge ferrule and tapered filaments keep the tip sharp, so it cuts a clean line even at this larger size.

What jobs suit this size best?
It works well on skirting boards, doors, larger window frames and any trim where you want fewer reloads without giving up control.

Can I use it with any paint type?
Yes, it is designed for all paints and stains, including latex, oil based and low VOC formulas, for interior and exterior use.