Dulux Quick Dry Satinwood 750ml - Egyptian Cotton

Dulux Quick Dry Satinwood 750ml in Egyptian Cotton is a mid-sheen satin finish paint for interior wood and metal, ideal for skirting boards, doors, door frames and other trim. It gives you a durable, wipeable finish in the same warm, soft, creamy neutral beige as Dulux Egyptian Cotton wall paint (colour code 40YY 65/061), so your trim and walls coordinate perfectly. Egyptian Cotton has a subtle warm undertone that shifts gently with the light, taking on a raw cashmere warmth under warm artificial light and softer grey undertones in cool, north-facing daylight. It pairs naturally with stone, pale wood, clay, plaster and soft greys.

Key features

• Self-undercoating on most surfaces, so a separate undercoat is not always needed
• Wipeable, durable satin finish for wood and metal trim
• Non-yellowing formula that keeps its true colour over time
• Quick Dry, low-odour formula, recoat in as little as 4-6 hours
• Coverage of up to 12m2 per litre
• Can be applied by brush, roller or spray

How to use Dulux Quick Dry Satinwood

1. Prepare the surface: make sure it is clean, dry and free of dust, grease and flaking paint. Lightly sand glossy or bare wood to key the surface.
2. Undercoat if needed: Dulux Quick Dry Satinwood is self-undercoating on most previously painted surfaces. For bare or factory-primed wood, or where you are making a strong colour change, apply a suitable undercoat first for the best finish and coverage.
3. Stir well, then apply the first coat evenly by brush, roller or spray.
4. Allow to dry and recoat after 4-6 hours.
5. Apply a second full coat for a durable, wipeable, non-yellowing satin finish. Allow to dry fully before normal use.

Frequently asked questions

How much coverage do I get from a 750ml tin?
Dulux Quick Dry Satinwood covers up to 12m2 per litre, so a 750ml tin covers approximately 9m2 per coat, depending on the surface.

How long before I can recoat?
You can recoat after 4-6 hours, making it easy to apply two full coats in a single day.

Do I need an undercoat on bare wood?
Dulux Quick Dry Satinwood is self-undercoating on most surfaces, but on bare or factory-primed wood, or for strong colour changes, applying a separate undercoat first is recommended for the best finish and coverage.

How many coats will I need?
Two full coats of Dulux Quick Dry Satinwood are recommended for a durable, even, non-yellowing satin finish.

Technical & safety information

Watch the official Dulux Trade video below for guidance on achieving the best finish with Quick Dry trim paint.

For full technical and safety data for Dulux Quick Dry Satinwood in Egyptian Cotton, see the official Safety Data Sheet: Egyptian Cotton Quick Dry Satinwood SDS (PDF).