Bedec MSP Soft Matt Black 250ml

The Bedec MSP Soft Matt Black 250ml is a water based multi surface paint in a soft matt finish, for almost any surface inside or out.

Its flexible film resists flaking and peeling, and it goes straight onto wood, metal, plastic, uPVC, tiles, MDF, masonry and radiators without a primer or undercoat. One 250ml tin covers about 3 to 3.5m² per coat.

Key features

• Water based, low VOC and quick drying
• No primer or undercoat needed, except on bare iron or steel
• Flexible, so it resists flaking and peeling
• Goes over most paints, weathered tar varnish, bitumen and creosote
• Non yellowing, with brushes cleaned in water
• Covers about 3 to 3.5m² per coat

How to use the Bedec MSP Soft Matt Black 250ml

1. Clean and degrease the surface, and lightly key glossy areas.
2. On porous surfaces, thin the first coat with up to 30% clean water.
3. Apply by brush or roller. It is touch dry in 2 to 4 hours and can be recoated after 4 hours at 18°C.
4. Use a stain blocker over knots or marks that may bleed through.

Also see the MSP Soft Matt Black 2.5L. Seal knots and marks first with Bedec Stain Block, or browse the full Bedec range.

FAQs

Do I need a primer?

No, except on bare iron or steel. Bedec MSP sticks directly to most surfaces.

Is Bedec MSP waterproof?

It is weather resistant and fine outdoors, but it is microporous rather than fully waterproof. Avoid areas in constant contact with water.

How much does 250ml cover?

The Bedec MSP Soft Matt Black 250ml covers about 3 to 3.5m² per coat.