Bedec MSP Satin Soft White 2.5L

The Bedec MSP Satin Soft White 2.5L is a water based multi surface paint in a satin finish, for almost any surface inside or out.

Its flexible film resists flaking and peeling, and it goes straight onto wood, metal, plastic, uPVC, tiles, MDF, masonry and radiators without a primer or undercoat. One 2.5L tin covers about 30 to 35m² per coat.

Key features

• Water based, low VOC and quick drying
• No primer or undercoat needed, except on bare iron or steel
• Flexible, so it resists flaking and peeling
• Goes over most paints, weathered tar varnish, bitumen and creosote
• Non yellowing, with brushes cleaned in water
• Covers about 30 to 35m² per coat

How to use the Bedec MSP Satin Soft White 2.5L

1. Clean and degrease the surface, and lightly key glossy areas.
2. On porous surfaces, thin the first coat with up to 30% clean water.
3. Apply by brush or roller. It is touch dry in 2 to 4 hours and can be recoated after 4 hours at 18°C.
4. Use a stain blocker over knots or marks that may bleed through.

Also see the MSP Soft Gloss Soft White 250ml. Seal knots and marks first with Bedec Stain Block, or browse the full Bedec range.

FAQs

Do I need a primer?

No, except on bare iron or steel. Bedec MSP sticks directly to most surfaces.

Is Bedec MSP waterproof?

It is weather resistant and fine outdoors, but it is microporous rather than fully waterproof. Avoid areas in constant contact with water.

How much does 2.5L cover?

The Bedec MSP Satin Soft White 2.5L covers about 30 to 35m² per coat.