{"product_id":"rustoleum-white-satin-radiator-spray-paint-400ml","title":"Rustoleum White Satin Radiator Spray Paint - 400ml","description":"\u003cp\u003eRustoleum White Satin Radiator Spray Paint gives tired radiators, pipework and metal fittings a smooth, professional looking satin white finish in a fraction of the time a brush would take. This 400ml aerosol is a genuine rustoleum radiator paint, formulated to cope with the heat a domestic radiator generates, and it resists yellowing and chipping far better than ordinary spray paint. The fine, even mist makes it ideal for awkward radiator panels, grilles and pipe runs where a brush can struggle to reach.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eSatin white finish that resists yellowing and chipping over time\u003c\/li\u003e\n\u003cli\u003eApprox. 2m² coverage per can, depending on surface porosity and number of coats\u003c\/li\u003e\n\u003cli\u003eTypically touch dry in around 15 to 20 minutes, with a short recoat window\u003c\/li\u003e\n\u003cli\u003eFormulated to withstand the heat generated by a domestic radiator once fully cured\u003c\/li\u003e\n\u003cli\u003eSuitable for radiators, pipework, metal furniture, grilles and other interior metal surfaces\u003c\/li\u003e\n\u003cli\u003eFast, even aerosol application with no brushes, rollers or brush marks\u003c\/li\u003e\n\u003cli\u003eFull cure typically within 24 to 48 hours before switching the heating back on\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eBefore you start, turn the heating off and let the radiator cool completely. Clean the surface with sugar soap or a mild detergent to remove grease, dust and old polish, then lightly key any glossy old paintwork with fine abrasive paper so the new coat has something to grip. Treat any rusty patches with a rust inhibiting treatment or metal primer, and mask off the surrounding wall, skirting and floor before you spray, working in a well ventilated room.\u003c\/p\u003e\n\u003cp\u003eShake the can thoroughly for at least a minute, and test the spray pattern on a scrap of card first. Hold the can approximately 25 to 30cm from the surface and apply in light, even sweeping passes, keeping the can moving to avoid runs. Two to three thin coats give a better, more durable finish than one heavy coat. Allow each coat to become touch dry, typically around 15 to 20 minutes, before applying the next, and leave the paint to fully cure, usually 24 to 48 hours, before turning the heating back on so the finish has time to harden properly.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eRustoleum\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eWhite\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e400ml aerosol\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. coverage\u003c\/td\u003e\n\u003ctd\u003eApprox. 2m² per can, surface dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch dry time\u003c\/td\u003e\n\u003ctd\u003eApprox. 15 to 20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecoat time\u003c\/td\u003e\n\u003ctd\u003eApprox. 1 hour, check the can for full guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat resistance\u003c\/td\u003e\n\u003ctd\u003eFormulated for typical domestic radiator surface temperatures once fully cured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003eAerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for\u003c\/td\u003e\n\u003ctd\u003eRadiators, pipework and other interior metal surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eHow do you use Rustoleum radiator spray paint?\u003c\/h4\u003e\n\u003cp\u003eMake sure the radiator is switched off and completely cool, then clean and prepare the surface. Shake the can well, hold it around 25 to 30cm away, and apply two to three light, even coats rather than one thick coat, allowing each to become touch dry before the next.\u003c\/p\u003e\n\u003ch4\u003eDo I need to prime a rusty radiator before spraying?\u003c\/h4\u003e\n\u003cp\u003eYes. Treat any rust with a rust inhibiting treatment or metal primer and sand the area smooth before applying the enamel. On bare or heavily rusted metal, a primer coat will noticeably improve adhesion and how long the finish lasts.\u003c\/p\u003e\n\u003ch4\u003eHow long does radiator spray paint take to dry?\u003c\/h4\u003e\n\u003cp\u003eIt is typically touch dry within around 15 to 20 minutes, with a short recoat window after that. For the paint to fully harden, allow a full cure of around 24 to 48 hours before switching the heating back on.\u003c\/p\u003e\n\u003ch4\u003eCan you spray paint radiator pipes as well as the panel?\u003c\/h4\u003e\n\u003cp\u003eYes, this spray is suitable for pipework and metal fittings around the radiator as well as the main panel, provided everything is cool, clean and properly masked off first for a neat, sharp edge.\u003c\/p\u003e\n\u003ch4\u003eDo I need to remove the radiator from the wall to spray it?\u003c\/h4\u003e\n\u003cp\u003eIt is not essential. Most people paint radiators in place, using masking paper and tape to protect the wall behind and the floor below. Removing the radiator can make it easier to get full coverage around the brackets, but it is not required for a good result.\u003c\/p\u003e\n\u003ch4\u003eWhat is the difference between satin and gloss radiator paint?\u003c\/h4\u003e\n\u003cp\u003eSatin gives a soft, low sheen finish that shows fewer fingerprints and imperfections than high gloss, while gloss gives a brighter, more reflective look. Both are hard wearing once cured, so the choice comes down to the finish you prefer for the room.\u003c\/p\u003e","brand":"Rustoleum","offers":[{"title":"Default Title","offer_id":55612095136130,"sku":"125512","price":7.44,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/462402_20250331134636_1024.jpg?v=1756510672","url":"https:\/\/essentialsfix.co.uk\/products\/rustoleum-white-satin-radiator-spray-paint-400ml","provider":"Essentials Fix","version":"1.0","type":"link"}