{"product_id":"plastikote-magnolia-satin-radiator-spray-paint-400ml","title":"PlastiKote Magnolia Satin Radiator Spray Paint - 400ml","description":"\u003cp\u003ePlastiKote Magnolia Satin Radiator Spray Paint gives radiators, pipes and towel rails a smooth, even magnolia satin finish straight from the can. This heat resistant radiator spray paint is formulated to cope with the temperature changes of central heating without cracking or discolouring, making it a quick way to refresh a tired radiator without reaching for a brush.\u003c\/p\u003e\u003ch3\u003eKey Features\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eCovers approx. 2-2.5m² per 400ml aerosol can, coverage varies by surface and application\u003c\/li\u003e\n\u003cli\u003eTouch dry in around 15-20 minutes, ready to recoat once touch dry\u003c\/li\u003e\n\u003cli\u003eHeat resistant formula suited to the normal temperatures reached by central heating radiators\u003c\/li\u003e\n\u003cli\u003eAerosol spray application for an even, brush-mark-free finish\u003c\/li\u003e\n\u003cli\u003eSuitable for steel and cast iron radiators, pipes, towel rails and hard-to-reach areas behind radiators\u003c\/li\u003e\n\u003cli\u003eNon-yellowing magnolia satin colour that holds its finish over time\u003c\/li\u003e\n\u003cli\u003eNo drips, no brush marks and no stray bristles, just a smooth sprayed coat\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface:\u003c\/strong\u003e wipe down the radiator to remove grease, dust and any flaking paint. If the existing finish is glossy, key it lightly with fine abrasive paper so the new coat can grip. Treat any rust spots and prime bare metal before spraying, and mask the wall, floor and surrounding pipework.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVentilate:\u003c\/strong\u003e spray in a well-ventilated room and, where possible, with the heating off and the radiator cool.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply:\u003c\/strong\u003e shake the can thoroughly for at least a minute. Hold it upright around 25-30cm from the surface and spray in a steady, sweeping motion. Build colour with several thin, even coats rather than one heavy coat to avoid drips and runs.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDry between coats:\u003c\/strong\u003e allow each coat to become touch dry, typically 15-20 minutes, before applying the next.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eCure before use:\u003c\/strong\u003e leave the finish to cure fully, generally 24-48 hours, before switching the heating back on so the paint hardens properly.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\u003ctable\u003e\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003ePlastiKote\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eMagnolia\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eSatin\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e400ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. coverage\u003c\/td\u003e\n\u003ctd\u003eapprox. 2-2.5m² per 400ml aerosol, coverage varies by surface\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch dry time\u003c\/td\u003e\n\u003ctd\u003eapprox. 15-20 minutes\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecoat time\u003c\/td\u003e\n\u003ctd\u003eonce touch dry, typically within an hour\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFull cure \/ heat resistance\u003c\/td\u003e\n\u003ctd\u003etypically heat resistant up to approx. 130°C once fully cured\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003eAerosol spray\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for\u003c\/td\u003e\n\u003ctd\u003eSteel and cast iron radiators, pipes, towel rails and other metal surfaces\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\u003c\/table\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003ch4\u003eHow do you paint a radiator?\u003c\/h4\u003e\u003cp\u003eTurn the heating off and let the radiator cool, clean the surface, key any glossy old paint with fine abrasive paper and treat rust spots. Mask the surrounding wall and floor, then apply radiator spray paint in several light, even coats rather than one heavy coat, letting each coat go touch dry before the next.\u003c\/p\u003e\u003ch4\u003eCan you spray paint radiators?\u003c\/h4\u003e\u003cp\u003eYes. Aerosol radiator paints like this one are designed specifically for radiators, giving a smooth, brush-mark-free finish that is quicker to apply than brush-on enamel, especially on ridged or panel-style radiators.\u003c\/p\u003e\u003ch4\u003eHow to paint behind a radiator?\u003c\/h4\u003e\u003cp\u003eMask the wall behind the radiator with paper or card to protect it, then angle the spray can into the gap and apply light, even bursts rather than one continuous spray. Where access is very tight, some people remove the radiator from its brackets to paint it more easily and refit it once fully cured.\u003c\/p\u003e\u003ch4\u003eHow long does radiator paint take to dry?\u003c\/h4\u003e\u003cp\u003eThis spray paint is typically touch dry within 15-20 minutes of application. Allow the full finish to cure for around 24-48 hours before turning the heating back on so the paint hardens properly and resists marking.\u003c\/p\u003e\u003ch4\u003eDo you need special paint for radiators?\u003c\/h4\u003e\u003cp\u003eYes. Ordinary wall or wood paint is not designed to cope with the heat a radiator generates and can discolour, crack or give off odours when heated. A dedicated heat resistant radiator paint like this one is formulated to withstand those temperatures.\u003c\/p\u003e\u003ch4\u003eCan you paint radiator pipes as well as the radiator itself?\u003c\/h4\u003e\u003cp\u003eYes, this spray paint is also suitable for metal radiator pipes, provided they are cleaned, keyed if previously glossy, and any bare metal is primed first for the best adhesion.\u003c\/p\u003e","brand":"PlastiKote","offers":[{"title":"Default Title","offer_id":55608758927746,"sku":"580144","price":7.09,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/5055018109509_1024.jpg?v=1756478074","url":"https:\/\/essentialsfix.co.uk\/products\/plastikote-magnolia-satin-radiator-spray-paint-400ml","provider":"Essentials Fix","version":"1.0","type":"link"}