{"product_id":"johnstones-white-gloss-quick-dry-gloss-paint-radiator-metal-safe-750ml","title":"Johnstone's White Gloss Quick Dry Gloss Paint (Radiator \u0026 Metal Safe) - 750ml","description":"\u003cp\u003eJohnstone's Quick Dry Non Drip Gloss in Brilliant White is a genuine all rounder, a fast drying, low odour gloss paint built for interior wood and metal including skirting boards, doors, furniture and metal fittings. Its non drip formula flows on smoothly with far less trailing or spatter than a thinner gloss, and because it is tough enough for metal surfaces, it is also a popular choice for giving radiators a fresh, glossy white finish once they have cooled and been properly prepped.\u003c\/p\u003e\n\u003ch3\u003eKey Features\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eHigh opacity brilliant white gloss with a smooth, glass like sheen\u003c\/li\u003e\n\u003cli\u003eNon drip formula for controlled, even application with minimal spatter\u003c\/li\u003e\n\u003cli\u003eQuick drying, typically touch dry within 1 to 2 hours\u003c\/li\u003e\n\u003cli\u003eLow odour, water based formulation suitable for use in occupied rooms\u003c\/li\u003e\n\u003cli\u003eDurable finish designed to withstand everyday knocks on wood and metal\u003c\/li\u003e\n\u003cli\u003eSuitable for interior wood and metal, including doors, skirting boards, furniture and radiators once cooled\u003c\/li\u003e\n\u003cli\u003eApprox. 8m² coverage per coat, depending on surface porosity\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eHow to Use\u003c\/h3\u003e\n\u003cp\u003eClean the surface to remove grease, dust and any old wax or polish. On previously glossed woodwork or metal, key the old finish with fine abrasive paper so the new coat has something to grip. Treat any bare metal or rusty patches with a suitable metal primer before you paint. If you are painting a radiator, make sure the heating is switched off and the radiator has fully cooled before you start, and keep it off until the paint has properly cured.\u003c\/p\u003e\n\u003cp\u003eStir the paint well before use and apply with a good quality brush, or a roller for larger flat areas, working thin, even coats in the direction of the grain on wood. Two coats normally give the best, most durable finish. Allow each coat to become touch dry, typically 1 to 2 hours, before recoating, and leave the full cure time stated on the tin, usually a few days, before the surface goes into heavy everyday use or a painted radiator is switched back on to full duty.\u003c\/p\u003e\n\u003ch3\u003eTechnical Specifications\u003c\/h3\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003ctd\u003eBrand\u003c\/td\u003e\n\u003ctd\u003eJohnstone's\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eColour\u003c\/td\u003e\n\u003ctd\u003eBrilliant White\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFinish\u003c\/td\u003e\n\u003ctd\u003eGloss\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSize\u003c\/td\u003e\n\u003ctd\u003e750ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApprox. coverage\u003c\/td\u003e\n\u003ctd\u003eApprox. 8m² per coat, surface dependent\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTouch dry time\u003c\/td\u003e\n\u003ctd\u003eApprox. 1 to 2 hours\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eRecoat time\u003c\/td\u003e\n\u003ctd\u003eTypically same day, check the tin for full guidance\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eHeat resistance \/ suitability\u003c\/td\u003e\n\u003ctd\u003eGeneral purpose gloss for wood and metal; suitable for radiators once cooled and prepared, though a dedicated radiator enamel is the safer choice for the hottest contact areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eApplication method\u003c\/td\u003e\n\u003ctd\u003eBrush, or roller for larger areas\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSuitable for\u003c\/td\u003e\n\u003ctd\u003eInterior wood, metal, skirting boards, doors, furniture and radiators once cooled\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\n\u003ch4\u003eCan you use gloss paint on a radiator?\u003c\/h4\u003e\n\u003cp\u003eYes, a good quality non drip gloss like this one can be used on a radiator, provided the radiator is switched off and has fully cooled, and the surface has been cleaned, keyed and primed where needed. For the areas of a radiator or pipework that get hottest, closest to the boiler or valve, a dedicated heat formulated radiator enamel is usually the safer long term choice, as it is specifically designed to cope with sustained high temperatures without discolouring or losing adhesion.\u003c\/p\u003e\n\u003ch4\u003eCan you use normal gloss paint on a radiator?\u003c\/h4\u003e\n\u003cp\u003eA standard interior gloss such as this one is fine for the main panel of a radiator once it is cool, clean and lightly sanded. Always check the tin's own guidance on heat tolerance, and avoid using it on pipework or fittings that run extremely hot close to the boiler, as sustained high heat can cause an ordinary gloss to yellow or become brittle over time.\u003c\/p\u003e\n\u003ch4\u003eHow long should you leave a radiator off before painting it?\u003c\/h4\u003e\n\u003cp\u003eTurn the heating off and let the radiator cool completely, ideally for several hours or overnight, before you start prepping or painting. Painting a warm radiator can affect how the paint flows and dries, and increases the risk of fumes building up.\u003c\/p\u003e\n\u003ch4\u003eIs this gloss suitable for wood as well as metal?\u003c\/h4\u003e\n\u003cp\u003eYes. It is formulated as a genuine all purpose gloss for interior wood and metal, including doors, skirting boards, furniture and metal fittings, as well as radiators once they have cooled.\u003c\/p\u003e\n\u003ch4\u003eHow long does Johnstone's Quick Dry Gloss take to dry?\u003c\/h4\u003e\n\u003cp\u003eIt is typically touch dry within around 1 to 2 hours, though this can vary with room temperature and ventilation. Always check the tin for the current recoat and full cure guidance before applying a second coat or putting the surface into heavy use.\u003c\/p\u003e\n\u003ch4\u003eDo I need to prime bare metal before using this gloss?\u003c\/h4\u003e\n\u003cp\u003eYes, bare or rusty metal should be treated and primed before you apply this gloss, to get the best adhesion and a longer lasting finish. On previously painted surfaces that are in good condition, a light sand to key the old finish is normally enough.\u003c\/p\u003e","brand":"Johnstone's","offers":[{"title":"Default Title","offer_id":55610864140674,"sku":"101417","price":11.73,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/422297_20200211143150_1024.jpg?v=1756496131","url":"https:\/\/essentialsfix.co.uk\/products\/johnstones-white-gloss-quick-dry-gloss-paint-radiator-metal-safe-750ml","provider":"Essentials Fix","version":"1.0","type":"link"}