{"title":"Sikkens Cetol Filter 7 Plus","description":"\u003cp\u003eShop the full range of \u003cstrong\u003eSikkens Cetol Filter 7 Plu\u003c\/strong\u003es, a highly translucent, medium build solvent borne exterior woodstain, now sold as Sikkens Cetol Filter 7 following the 2024 rebrand with the formulation unchanged. Its advanced UV light absorbers shield timber from sun damage while the moisture vapour permeable film lets trapped water escape, giving up to 5 years of protection from weathering in a translucent satin finish. Ideal as a topcoat on exterior softwood and hardwood joinery, windows, doors and cladding, whether applied as a one coat maintenance stain over existing systems or as two coats over a Sikkens Cetol HLS Plus base stain on new or bare wood. Not recommended for decking or surfaces exposed to heavy abrasion. Available in ready mixed Sikkens Cetol shades including Light Oak, Teak, Dark Oak, Pine, Rosewood and Ebony in 1L, 2.5L and 5L, with fast UK delivery.\u003c\/p\u003e","products":[{"product_id":"sikkens-cetol-filter-7-plus-1l-light-oak","title":"Sikkens Cetol Filter 7 Plus 1L, Light Oak (006)","description":"\u003cp\u003eA soft, natural light oak tone that keeps timber looking fresh and lets the grain read through clearly. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Light Oak is one of the recommended shades for one coat maintenance refreshes, and a good lightening option when recoating over a darker existing colour.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Oak (006)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_006.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Light Oak 006 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608661377410,"sku":"321353","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_light_oak_006.jpg?v=1784679840"},{"product_id":"sikkens-cetol-filter-7-plus-1l-dark-oak","title":"Sikkens Cetol Filter 7 Plus 1L, Dark Oak (009)","description":"\u003cp\u003eA warm, mid brown dark oak tone that adds depth to the timber without looking heavy. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Dark Oak gives good depth and richness on hardwood joinery. Avoid applying it over timber that is already dark, since very dark on dark can flatten the look of the grain rather than enhance it.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Dark Oak (009)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_009.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Dark Oak 009 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608661705090,"sku":"446096","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_dark_oak_009.jpg?v=1784679875"},{"product_id":"sikkens-cetol-filter-7-plus-1l-walnut","title":"Sikkens Cetol Filter 7 Plus 1L, Walnut (010)","description":"\u003cp\u003eA warm mid brown walnut tone that sits comfortably between the lighter and darker shades in the range. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Walnut is a versatile mid tone, equally suited to new joinery and to refreshing existing Filter 7 Plus coatings.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Walnut (010)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_010.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Walnut 010 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608662032770,"sku":"321376","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_walnut_010.jpg?v=1784679887"},{"product_id":"sikkens-cetol-filter-7-plus-1l-mahogany","title":"Sikkens Cetol Filter 7 Plus 1L, Mahogany (045)","description":"\u003cp\u003eA deep, reddish brown mahogany tone for a rich, traditional finish. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Mahogany is a striking, deeper shade best suited to well prepared, evenly coloured timber. On patchy or repaired surfaces, a darker shade like this can help even out the appearance.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Mahogany (045)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_045.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Mahogany 045 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608662425986,"sku":"322656","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_mahogany_045.jpg?v=1784679900"},{"product_id":"sikkens-cetol-filter-7-plus-1l-teak","title":"Sikkens Cetol Filter 7 Plus 1L, Teak (085)","description":"\u003cp\u003eA warm, golden brown teak tone, one of the most popular shades for exterior doors and windows. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Teak also works well as a lighter alternative when recoating darker hardwoods, helping avoid further darkening of the timber.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Teak (085)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_085.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Teak 085 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608662720898,"sku":"321410","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens-cetol-filter-7-teak-1l.jpg?v=1784679913"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-mahogany","title":"Sikkens Cetol Filter 7 Plus 2.5L, Mahogany (045)","description":"\u003cp\u003eA deep, reddish brown mahogany tone for a rich, traditional finish. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Mahogany is a striking, deeper shade best suited to well prepared, evenly coloured timber. On patchy or repaired surfaces, a darker shade like this can help even out the appearance.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Mahogany (045)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_045.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Mahogany 045 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608662753666,"sku":"321330","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_2_5_litre_mahogany_045.jpg?v=1784679925"},{"product_id":"sikkens-cetol-filter-7-plus-1l-rosewood","title":"Sikkens Cetol Filter 7 Plus 1L, Rosewood (048)","description":"\u003cp\u003eA rich, red toned rosewood shade with a warm, decorative character. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Rosewood gives a warm, reddish finish similar to Mahogany but slightly softer, a popular choice for feature doors and decorative joinery.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Rosewood (048)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_048.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Rosewood 048 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608663048578,"sku":"322662","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_rosewood_048.jpg?v=1784679936"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-dark-oak","title":"Sikkens Cetol Filter 7 Plus 2.5L, Dark Oak (009)","description":"\u003cp\u003eA warm, mid brown dark oak tone that adds depth to the timber without looking heavy. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Dark Oak gives good depth and richness on hardwood joinery. Avoid applying it over timber that is already dark, since very dark on dark can flatten the look of the grain rather than enhance it.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Dark Oak (009)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_009.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Dark Oak 009 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608663081346,"sku":"321318","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_2_5_litre_dark_oak_009.jpg?v=1784679960"},{"product_id":"sikkens-cetol-filter-7-plus-1l-ebony","title":"Sikkens Cetol Filter 7 Plus 1L, Ebony (020)","description":"\u003cp\u003eA near black ebony tone for maximum depth and contrast. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Ebony is the darkest shade in the range and will highlight surface imperfections more than lighter shades, so thorough preparation matters most here. It is best applied to well prepared bare or lightly coated timber rather than as a one coat maintenance refresh.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Ebony (020)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_020.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Ebony 020 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608663343490,"sku":"321382","price":21.69,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_ebony_020.jpg?v=1784679972"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-teak","title":"Sikkens Cetol Filter 7 Plus 2.5L, Teak (085)","description":"\u003cp\u003eA warm, golden brown teak tone, one of the most popular shades for exterior doors and windows. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Teak also works well as a lighter alternative when recoating darker hardwoods, helping avoid further darkening of the timber.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Teak (085)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_085.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Teak 085 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55608663441794,"sku":"321324","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens-cetol-filter-7-teak-2.5l.jpg?v=1784679985"},{"product_id":"sikkens-cetol-filter-7-plus-1l-077-pine","title":"Sikkens Cetol Filter 7 Plus 1L, Pine (077)","description":"\u003cp\u003eA light, honey toned pine shade that keeps softwood looking bright and natural. This 1L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Pine is one of the lightest shades in the range, well suited to softwood joinery and to maintenance coats where a fresh, light appearance is wanted.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (1L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 1L tin covers approximately 16 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pine (077)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_077.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Pine 077 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609722634626,"sku":"315005","price":21.69,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_1_litre_pine_077.jpg?v=1784679998"},{"product_id":"sikkens-cetol-filter-7-plus-5l-085-teak","title":"Sikkens Cetol Filter 7 Plus 5L, Teak (085)","description":"\u003cp\u003eA warm, golden brown teak tone, one of the most popular shades for exterior doors and windows. This 5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Teak also works well as a lighter alternative when recoating darker hardwoods, helping avoid further darkening of the timber.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 5L tin covers approximately 80 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Teak (085)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_085.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Teak 085 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609733415298,"sku":"315662","price":81.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens-cetol-filter-7-teak-5l.jpg?v=1784680069"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-077-pine","title":"Sikkens Cetol Filter 7 Plus 2.5L, Pine (077)","description":"\u003cp\u003eA light, honey toned pine shade that keeps softwood looking bright and natural. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Pine is one of the lightest shades in the range, well suited to softwood joinery and to maintenance coats where a fresh, light appearance is wanted.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Pine (077)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_077.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Pine 077 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609733841282,"sku":"315659","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_2_5_litre_pine_077.jpg?v=1784680010"},{"product_id":"sikkens-cetol-filter-7-plus-5l-010-walnut","title":"Sikkens Cetol Filter 7 Plus 5L, Walnut (010)","description":"\u003cp\u003eA warm mid brown walnut tone that sits comfortably between the lighter and darker shades in the range. This 5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Walnut is a versatile mid tone, equally suited to new joinery and to refreshing existing Filter 7 Plus coatings.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 5L tin covers approximately 80 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Walnut (010)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_010.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Walnut 010 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609734103426,"sku":"315663","price":81.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_5_litre_walnut_010.jpg?v=1784680083"},{"product_id":"sikkens-cetol-filter-7-plus-5l-048-rosewood","title":"Sikkens Cetol Filter 7 Plus 5L, Rosewood (048)","description":"\u003cp\u003eA rich, red toned rosewood shade with a warm, decorative character. This 5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Rosewood gives a warm, reddish finish similar to Mahogany but slightly softer, a popular choice for feature doors and decorative joinery.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 5L tin covers approximately 80 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Rosewood (048)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_048.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Rosewood 048 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609734496642,"sku":"315660","price":81.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/321721_20170105090545_1024.jpg?v=1756486810"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-010-walnut","title":"Sikkens Cetol Filter 7 Plus 2.5L, Walnut (010)","description":"\u003cp\u003eA warm mid brown walnut tone that sits comfortably between the lighter and darker shades in the range. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Walnut is a versatile mid tone, equally suited to new joinery and to refreshing existing Filter 7 Plus coatings.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Walnut (010)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_010.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Walnut 010 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609734529410,"sku":"357608","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_2_5_litre_walnut_010.jpg?v=1784680022"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-048-rosewood","title":"Sikkens Cetol Filter 7 Plus 2.5L, Rosewood (048)","description":"\u003cp\u003eA rich, red toned rosewood shade with a warm, decorative character. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Rosewood gives a warm, reddish finish similar to Mahogany but slightly softer, a popular choice for feature doors and decorative joinery.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Rosewood (048)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_048.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Rosewood 048 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609735152002,"sku":"357607","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_2_5_litre_rosewood_048.jpg?v=1784680034"},{"product_id":"sikkens-cetol-filter-7-plus-5l-009-dark-oak","title":"Sikkens Cetol Filter 7 Plus 5L, Dark Oak (009)","description":"\u003cp\u003eA warm, mid brown dark oak tone that adds depth to the timber without looking heavy. This 5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Dark Oak gives good depth and richness on hardwood joinery. Avoid applying it over timber that is already dark, since very dark on dark can flatten the look of the grain rather than enhance it.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 5L tin covers approximately 80 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Dark Oak (009)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_009.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Dark Oak 009 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609735217538,"sku":"357610","price":81.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_5_litre_dark_oak_009.jpg?v=1784680107"},{"product_id":"sikkens-cetol-filter-7-plus-5l-045-mahogany","title":"Sikkens Cetol Filter 7 Plus 5L, Mahogany (045)","description":"\u003cp\u003eA deep, reddish brown mahogany tone for a rich, traditional finish. This 5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Mahogany is a striking, deeper shade best suited to well prepared, evenly coloured timber. On patchy or repaired surfaces, a darker shade like this can help even out the appearance.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 5L tin covers approximately 80 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Mahogany (045)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_045.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Mahogany 045 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609735872898,"sku":"357612","price":81.59,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_5_litre_mahogany_045.jpg?v=1784680121"},{"product_id":"sikkens-cetol-filter-7-plus-2-5l-006-light-oak","title":"Sikkens Cetol Filter 7 Plus 2.5L, Light Oak (006)","description":"\u003cp\u003eA soft, natural light oak tone that keeps timber looking fresh and lets the grain read through clearly. This 2.5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Light Oak is one of the recommended shades for one coat maintenance refreshes, and a good lightening option when recoating over a darker existing colour.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (2.5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 2.5L tin covers approximately 40 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Oak (006)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_006.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Light Oak 006 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609735905666,"sku":"357606","price":50.49,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_2_5_litre_light_oak_006.jpg?v=1784680057"},{"product_id":"sikkens-cetol-filter-7-plus-5l-006-light-oak","title":"Sikkens Cetol Filter 7 Plus 5L, Light Oak (006)","description":"\u003cp\u003eA soft, natural light oak tone that keeps timber looking fresh and lets the grain read through clearly. This 5L tin of \u003cstrong\u003eSikkens Cetol Filter 7 Plus\u003c\/strong\u003e is a highly translucent, medium build, solvent borne exterior wood stain in a satin finish. It is formulated with advanced UV filters and a moisture vapour permeable film, which protects timber from sun damage while letting trapped moisture escape, giving up to 5 years of protection from weathering as part of a full coating system.\u003c\/p\u003e\u003ch3\u003eKey Benefits\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eHighly translucent satin finish that lets the natural wood grain show through\u003c\/li\u003e\n\u003cli\u003eAdvanced UV absorbers shield timber from sun related colour fade and degradation\u003c\/li\u003e\n\u003cli\u003eMicroporous and water repellent, so moisture escapes rather than getting trapped under the film\u003c\/li\u003e\n\u003cli\u003eFlexible coating that resists cracking and flaking as timber moves\u003c\/li\u003e\n\u003cli\u003eUp to 5 years of protection as part of a full Cetol system, with easy one coat maintenance\u003c\/li\u003e\n\u003cli\u003eSuitable for exterior softwood and hardwood joinery, windows, doors and cladding\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eWhere To Use It\u003c\/h3\u003e\u003cp\u003eSikkens Cetol Filter 7 Plus is designed as a topcoat for exterior timber that is regularly exposed to sun and rain. Typical uses include:\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003eWindows and window frames, in softwood or hardwood\u003c\/li\u003e\n\u003cli\u003eExternal doors, including panelled and glazed doors\u003c\/li\u003e\n\u003cli\u003eFascias, cladding and other exterior joinery\u003c\/li\u003e\n\u003cli\u003eGates, fences and garden structures made from planed timber\u003c\/li\u003e\n\u003cli\u003eFeature timber such as pergolas and decorative trim\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eIt is not recommended for decking, flooring or any surface exposed to heavy foot traffic or abrasion, since the satin film is not designed to withstand that level of wear. It is also not suitable for interior use.\u003c\/p\u003e\u003ch3\u003eHow to Use\u003c\/h3\u003e\u003col\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrepare the surface thoroughly.\u003c\/strong\u003e Because Filter 7 Plus is highly translucent, it will highlight rather than hide any staining, old coatings or filler beneath it, so sand back and clean the substrate before starting.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePrime bare or new timber first.\u003c\/strong\u003e On new or bare wood, apply Sikkens Cetol HLS Plus as a base coat before topcoating. On existing, sound Filter 7 Plus systems, this product can be applied as a one coat maintenance refresh.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStir thoroughly and apply undiluted\u003c\/strong\u003e with a good quality soft bristle brush, working in full, flowing strokes along the grain.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eAvoid over brushing.\u003c\/strong\u003e Working the stain too much thins the film and reduces weather protection, so aim for an even coat rather than just a decorative one.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eApply two coats over new or bare timber,\u003c\/strong\u003e allowing the recoat interval below between coats, and keep the gap between coats to under a month.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWork in the right conditions.\u003c\/strong\u003e Apply between 5°C and 35°C, avoid application above 85% relative humidity, and do not apply if rain is forecast before the coating has dried.\u003c\/li\u003e\n\u003c\/ol\u003e\u003cp\u003e\u003cem\u003eColour note:\u003c\/em\u003e Light Oak is one of the recommended shades for one coat maintenance refreshes, and a good lightening option when recoating over a darker existing colour.\u003c\/p\u003e\u003ch3\u003eTechnical Specifications (5L)\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eCoverage:\u003c\/strong\u003e approximately 16 m² per litre practical coverage. This 5L tin covers approximately 80 m².\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch dry:\u003c\/strong\u003e approximately 3 hours\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eRecoatable:\u003c\/strong\u003e after approximately 16 hours, with a maximum of 1 month between coats\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFinish:\u003c\/strong\u003e Translucent satin\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eVOC content:\u003c\/strong\u003e max 377 g\/L, Class A\/e compliant\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Light Oak (006)\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eDocumentation and Safety\u003c\/h3\u003e\u003cp\u003eAlways read the full safety information before use.\u003c\/p\u003e\u003cul\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/cetol_filter_7_plus.pdf\" target=\"_blank\" rel=\"noopener\"\u003eTechnical Data Sheet (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003cli\u003e\u003ca href=\"https:\/\/msp.images.akzonobel.com\/prd\/dh\/eukexp\/documents\/si_gb_en_cetol_filter_7_plus_006.pdf\" target=\"_blank\" rel=\"noopener\"\u003eSafety Data Sheet, Light Oak 006 (PDF)\u003c\/a\u003e\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Sikkens","offers":[{"title":"Default Title","offer_id":55609736692098,"sku":"357611","price":81.59,"currency_code":"GBP","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0918\/5024\/4482\/files\/sikkens_cetol_filter_7_plus_5_litre_light_oak_006.jpg?v=1784680132"}],"url":"https:\/\/essentialsfix.co.uk\/collections\/sikkens-cetol-filter-7-plus.oembed?page=2","provider":"Essentials Fix","version":"1.0","type":"link"}